聚合物锂电池MSDS

最新聚合物锂电池MSDS

Lithium Polymer Rechargeable battery

Model: 803450-1450mAh

Page 1 of 7

最新聚合物锂电池MSDS

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT IDENTIFICATION

XXXX Lithium-Ion Polymer Cell/Battery SP 803450-1450 mAh Lithium-Ion Cell Norminal Voltage 3.7 V Norminal Capacity 1450mAh Equivalent Lithium content : 5.37Wh Description LiCoO2+C

Testing Period Dec 28，2010 To Dec 30，2010 MANUFACTURER

XXXXXXXXXXX

2. COMPOSITION INFORMATION

3. HAZARDS IDENTIFICATION

Health Hazards (Acute and Chronic)

These chemicals are contained in a sealed can. Risk of exposure occurs only if the battery is mechanically or electrically abused. Contact of electrolyte and extruded lithium with skin and eyes should be avoided. Sign/Symptoms of Exposure

A shorted battery can cause thermal and chemical burns upon contact with the skin. May be a reproductive hazard.

4. FIRST AID MEASURES

Eye

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin

Remove contaminated clothes and rinse skin with plenty of water or shower for 15 minutes. Get medical aid. Inhalation

Remove from exposure and move to fresh air immediately. Use oxygen if available. Ingestion

Page 2 of 7

最新聚合物锂电池MSDS

Give at least 2 glasses of milk or water. Induce vomiting unless patient is unconscious. Call a physician.

5. FIRE FIGHTING MEASURES

Flash Point: N/A.

Auto-Ignition Temperature: N/A. Extinguishing Media Water, CO2.

Special Fire-Fighting Procedures Self-contained breathing apparatus. Unusual Fire and Explosion Hazards

Cell may vent when subjected to excessive heat-exposing battery contents. Hazardous Combustion Products

Carbon monoxide, carbon dioxide, lithium oxide fumes.

. 6. ACCIDENTAL RELEASE MEASURES

Steps to be Taken in case Material is Released or Spilled

If the battery material is released, remove personnel from area until fumes dissipate. Provide maximum ventilation to clear out hazardous gases. Wipe it up with a cloth, and dispose of it in a plastic bag and put into a steel can. The preferred response is to leave the area and allow the battery to cool and vapors to dissipate. Provide maximum

ventilation. Avoid skin and eye contact or inhalation of vapors. Remove spilled liquid with absorbent and incinerate. Waste Disposal Method

It is recommended to discharge the battery to the end, to use up the metal lithium inside the battery, and to bury the discharged battery in soil. 7. HANDLING AND STORAGE

The battery should not be opened, destroyed or incinerate, since they may leak or rupture and release to the environment the ingredients that they contain in the hermetically sealed container.

Do not short circuit terminals, or over charge the battery, forced over-discharge, throw to fire. Do not crush or puncture the battery, or immerse in liquids.

Precautions to be taken in handling and storing

Avoid mechanical or electrical abuse. Storage preferably in cool, dry and ventilated area, which is subject to little temperature change. Storage at high temperatures should be avoided.

Do not place the battery near heating equipment, nor expose to direct sunlight for long periods. Other Precautions

The battery may explode or cause burns, if disassembled, crushed or exposed to fire or high temperatures. Do not short or install with incorrect polarity. Page 3 of 7

最新聚合物锂电池MSDS

8. Exposure controls/personal protection

Respiratory Protection

In case of battery venting, provide as much ventilation as possible. Avoid confined areas with venting cell cores. Respiratory Protection is not necessary under conditions of normal use. Ventilation

Not necessary under conditions of normal use. Protective Gloves

Not necessary under conditions of normal use. Other Protective Clothing or Equipment Not necessary under conditions of normal use.

Personal Protection is recommended for venting battery

Respiratory Protection, Protective Gloves, Protective Clothing and safety glass with side shields.

9. Physical and chemical properties

Appearance characters：Silvery-white, prismatic, odorless, solid battery. Chemical Uses: Digital electronic products.

10. STABILITY AND REACTIVITY

Stability Stable

Conditions to Avoid

Heating, mechanical abuse and electrical abuse. Hazardous Decomposition Products N/A.

Hazardous Polymerization N/A.

If leaked, forbidden to contact with strong oxidizers, mineral acids, strong alkalies, halogenated hydrocarbons.

11. TOXCOLOGICAL INFORMATION

Inhalation, skin contact and eye contact are possible when the battery is opened.

Exposure to internal contents, the corrosive fumes will be very irritating to skin, eyes and mucous membranes. Overexposure can cause symptoms of non-fibrotic lung injury and membrane irritation.

Page 4 of 7

最新聚合物锂电池MSDS

12. ECOLOGICAL INFORMATION

Lithium polymer batteries do not contain heavy metals as defined by the European directives 2006/66/EC Article 21. Mercury has not been “intentionally introduced (as distinguished from mercury that may be incidentally present in other materials)” in the sense of the U.S.A. “Mercury-Containing and Rechargeable Battery Management Act (May 13 1996).

The Regulation on Mercury Content Limitation for Batteries promulgated on 1997-12-31 by the China authorities including the State Administration of Light Industry and the State Environmental Protection Administration defines low mercury as mercury content by weight in battery as less than 0.025 …… 此处隐藏：9156字，全部文档内容请下载后查看。喜欢就下载吧 ……