教学文库网 - 权威文档分享云平台
您的当前位置:首页 > 范文大全 > 行业范文 >

英文版MSDS -ABS塑胶

来源:网络收集 时间:2026-09-09
导读: 有关ABS材质的material safety data sheet,英文版,希望可以帮助到更多人。 Material Safety Data Sheet ABS 1. Product and Company Information Product Name: ABS Company Name: 某某公司 Company Address: 某某地址 Name of people in charge: 某某姓名 T

有关ABS材质的material safety data sheet,英文版,希望可以帮助到更多人。

Material Safety Data Sheet

ABS

1. Product and Company Information

Product Name: ABS

Company Name: 某某公司

Company Address: 某某地址

Name of people in charge: 某某姓名

TEL: 0000-68886688

2. Hazard Introduction

Inhalation: Under the molten state , the gas produced by raw materials may induce some

stimulation to the respiratory organs

Eye contact: Solid or particle shape materials may cause some stimulation to the eyes in eye

contact.

Skin contact: Under general condition, will not cause stimulation to skin.

Chronic response: None

Carcinogenicity: None

3. Composition /Information on Ingredients

Single/compound: Compound

Chemical name: ABS

4. Emergency Treatment

Inhalation: Under general condition, it’s impossible to inhale solid colloidal particles. But when inhale overmuch gas produced by molten resin, should take a breath under fresh air, adopt artificial respiration when necessary. Accept medical treatment when necessary.

Skin contact: No apparent symptoms, wear working gloves when necessary.

Eye contact: Only causes physical wounds, remove the foreign bodies will be OK. Accept medical treatment when necessary.

有关ABS材质的material safety data sheet,英文版,希望可以帮助到更多人。

5. Fire-fighting measures

Hazardous characteristics: None

Hazardous comburent: During thermal decomposition, may probably emit toxic or dangerous gases Extinguishing method: Powder fire extinguishing agent, carbon dioxide, water spray and foam

6. Emergency Handling of Leakage

Emergency treatment: None

7. Safety Handing and Storage

Cautions: No open fires in the storage places; Store under normal indoor condition.

8. Contact Control and Personal Protection

Operation control: Keep the site with adequate air ventilation. Wear a gauze mask during operation. Respiratory protection: When the air concentration is above normal standard, shall wear gas mask. Eye protection: wear safety glasses when necessary.

Body protection: No special requirements, wear labor suit during operation.

Hand protection: No special requirements, wear gloves during operation.

Other protection: No smoking, eating or drinking at the site. Maintain good health habits.

9. Physical and Chemical Properties

Appearance: granular state

Molecular weight: 50-250

Odor: None

Melting point: 180-200℃

Acid value: None

Ph: None

Water Solubility: Insoluble

10. Stability and Reactivity

Stability: Stable under normal circumstance.

Decomposition product: Under normal temperature, decomposition is impossible; Under thermal decomposition, will probably cause toxic carbon compounds and nitrogen oxides

11. Toxicology Analysis

Acute toxicity: None

Subacute and chronic toxicity: None

Irritation: None

Allergenicity: None

有关ABS材质的material safety data sheet,英文版,希望可以帮助到更多人。

Mutagenicity: None

Carcinogenicity: None

Others: None

12. Ecological Information

Ecological toxicity: None, not decompose in general soil

Ecological degradability: None

Non-biological degradability: None

Biological enrichment or biological accumulating: None

Other deleterious effect: None

13. Waste Disposal

Waste property: Recyclable

Exhaust gas disposal measures: Shall refer to the related local and national laws and regulations before disposal.

14. Transportation Information

Hazard goods No.: None

UN No.: None

Packing mark: None

Package method: None

Cautions about transportation: Regular packing and transportation.

15. Laws and Regulations Details

Laws and regulations details: None

16. Other Information

References: None

Form filling sector: None

Data verifying department: None

Modifying description: None

Other information: The information contained in this material safety data sheet (MSDS) was from sources which are believed to be reliable by the manufacturer. However, the information is provided without any responsibility or warranty, expressed or implied regarding its accuracy or correctness. For this and other reasons, the manufacturer does not assure responsibility and expressly disclaims liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of this product.

…… 此处隐藏:2132字,全部文档内容请下载后查看。喜欢就下载吧 ……
英文版MSDS -ABS塑胶.doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印
本文链接:https://www.jiaowen.net/fanwen/1985344.html(转载请注明文章来源)
Copyright © 2020-2025 教文网 版权所有
声明 :本网站尊重并保护知识产权,根据《信息网络传播权保护条例》,如果我们转载的作品侵犯了您的权利,请在一个月内通知我们,我们会及时删除。
客服QQ:78024566 邮箱:78024566@qq.com
苏ICP备19068818号-2
Top
× 游客快捷下载通道(下载后可以自由复制和排版)
VIP包月下载
特价:29 元/月 原价:99元
低至 0.3 元/份 每月下载150
全站内容免费自由复制
VIP包月下载
特价:29 元/月 原价:99元
低至 0.3 元/份 每月下载150
全站内容免费自由复制
注:下载文档有可能出现无法下载或内容有问题,请联系客服协助您处理。
× 常见问题(客服时间:周一到周五 9:30-18:00)